The post Series 410 Models 78 and 79 Two-Way Shutoff Valved Nipples and Couplers appeared first on PCU.

An eight (8) ball detent lock provides instant positive coupling.  Simply pull back the grooved locking ring on the coupler, slide the coupler over the nipple, and push together until the lock ring snaps to its “lock position”.

Because of the unique design of the Series 410 Models 66 and 67 Coupler and Nipple assemblies, they are able to be built using inexpensive O-ring seals which provide positive leak-tight shutoff.  They will hold pressure from vacuum to 1000 PSIG.

The standard Series 410 Coupler and Nipple assemblies can be built with a variety of seal compounds to satisfy your application.  Neoprene compound is generally used for R-22, R410, R404a, and compressed air.  Buna-N is generally used for HFC-134a with lubricants.  Other applications, which require oils/lubricants, please contact our Order Department at (1-937-299-5594) for help in selecting the correct compound for your particular application.

The Series 410 Models 66 and 67 Coupler and Nipple assemblies complement our Series 500, 91, and 93 Tube Quick Connect (TQC) Couplers to permit unrestricted flow.

Standard Stock: P/Ns 66311, 67311, 67411

The post Series 410 Models 66 and 67 Two-Way Shutoff Valved Nipples and Couplers appeared first on PCU.

These tough, lightweight PCU Couplers and Nipples utilize heat-treated parts for interchangeability and long life.  They provide a large unrestricted flow rate for a variety of production uses while minimizing process material loss during coupling and uncoupling.

An eight (8) ball detent lock provides instant positive coupling.  Simply pull back the grooved locking ring on the coupler, slide the coupler over the nipple, and push together until the lock ring snaps to its “lock position”.

Because of the unique design of the Series 250 Models 76 and 77 Coupler and Nipple assemblies, they are able to be built using inexpensive O-ring seals which provide positive leak-tight shutoff.  They will hold pressure from vacuum to 1000 PSIG.

The standard Series 250 Coupler and Nipple assembly can be built with a variety of seal compounds to satisfy your application.  Neoprene compound is generally used for R-22, R410, R404a, and compressed air.  Buna-N is generally used for HFC-134a with lubricants.  Other applications, which require oils/lubricants, please contact our Order Department at (1-937-299-5594) for help in selecting the correct compound for your particular application.

The Series 250 Models 76 and 77 Coupler and Nipple assemblies complement our Series 50, 500, 91, and 93 Tube Quick Connect (TQC) Couplers to permit unrestricted flow.

The post Series 250 Models 76 and 77 Two-Way Shutoff Valved Nipples and Couplers appeared first on PCU.

These tough, lightweight PCU Couplers and Nipples utilize heat-treated parts for interchangeability and long life.  They provide a large unrestricted flow rate (0.7 Cv) for a variety of production uses, while minimizing process material loss during coupling and uncoupling, within a temperature range of 0° to 250°F.

An eight (8) ball detent lock provides instant positive coupling.  Simply pull back the grooved locking ring on the coupler, slide the coupler over the nipple, and push together until the lock ring snaps to its “lock position”.

The standard Series 250 Models 71 and 72 Nipple and Coupler assemblies are built using neoprene seal material.  We recommend our standard products for processing R-22, R-410, R-404-A and compressed air.

If currently using the Series 250 Model 61 Nipple or Model 62 Coupler, inexpensive kits are available which can easily be retrofitted.  This allows you to take advantage of this design improvement.

When vacuum and ester oils are being used please contact our Order Department at (937-299-5594) for help in selecting the correct elastomer for your particular application.

The Series 250 Models 71 and 72 Nipples and Couplers complement our Series 50, 500, 91, and 93 Tube Quick Connect (TAC) Couplers to permit unrestricted flow.

The post Series 250 Models 71 and 72 Two-Way Shutoff Valved Nipples and Couplers appeared first on PCU.

Models 64 and 65 utilize heat-treated parts for interchangeability and long life.  They provide a large unrestricted flow rate for a variety of production uses while minimizing process material loss during coupling and uncoupling.

An eight (8) ball detent lock provides instant positive coupling.  Simply pull back the grooved locking ring on the Coupler, slide the Coupler over the Nipple and push together until the lock ring snaps to its “lock position”.

Because of the unique design of the Series 250 Couplers and Nipple assemblies, they are able to be built using inexpensive O-ring seals which provide positive leak-tight shutoff.  They will hold pressure from vacuum to 1000 PSIG.

The standard Series 250 Coupler and Nipple assemblies can be built with a variety of seal compounds to satisfy your application.  Neoprene compound is generally used for R-22, R410, R404a, and compressed air.  Buna-N is generally used for HFC-134a with lubricants. Other applications, which require oils/lubricants, please contact our Order Department at (937) 299-5594 for help in selecting the correct compound for your particular application.

The Series 250 Couplers and Nipples complement our Series 50, 500, 91, and 93 Tube Quick Connect (TQC) Couplers to permit unrestricted flow.

Customized end caps are available.

Standard Stock Units: 64N231, 65N211

The post Series 250 Models 64 and 65 Two-Way Shutoff Valved Nipples and Couplers appeared first on PCU.

Customized end caps are available.

Standard Stock: P/Ns 61211, 61217, 62211, 62217, and 62321

The post Two-way Shut off Valve Series 250 Models 61 & 62 appeared first on PCU.

Use the PCU Series 25/EPF Coupler for product evacuating, charging, pressure testing; wherever you need a quick connection in appliance manufacturing or processing. The coupler’s standard seal material is neoprene.  Other seal materials are available for applications using vacuum, refrigerant, air, helium, nitrogen, lubricants, or water.

The PCU Series 25/EPF Coupler can be ordered with one of a variety of adapter caps to meet your installation needs.  The coupler is easy to maintain, ensuring long term use.

Standard Stock: P/N 62PF211, 62PF212, 62PF213, and 62PF221.

The post Series 25 Model EPF Quick-Connect Coupler appeared first on PCU.

Applications

• Vacuum
• Refrigerants
• Oil
• High Side Fitting R134a

Standard Stock: P/N 87211 or 87221

The post Series HFC-134a BalLoc Model 87 Coupler appeared first on PCU.

Applications

• Vacuum
• Refrigerants
• Oil
• Low Side Fitting R134a

Standard Stock: P/N 86221

The post Series HFC-134a BalLoc Model 86 Coupler appeared first on PCU.

Application

• Vacuum
• Refrigerant
• Oil
• Low side fitting

Specifications

• Characteristic: For HFO-1234yf Low Side Fitting
• Coupler Style: Power Charging Coupler
• Stem Extension: 10 to 10.5 mm (SAE J639 Standard)
• Air Pilots: Clamp Air
• Factory Air Supply: 60 psig/ 4.2 kg/cm2
• Air Port Fitting: 1/4″ Dia. One Touch Connectors
• Weight: 1.15 lbs/ 0.5 kg
• Vacuum Indicating Range: ATM – 10 microns Torr
• Vacuum Flow: 2.8 SCFM
• Fluid & Vacuum Port Fitting: 3/8″ JIC Flare
• Refrigerant: HFO-1234yf at 600 psig max. (42 kg/cm2)
• Process Fitting Nose Seal: Molded
• Process Fitting Clamp System: PCU BalLoc
• Oil Compatibility: Polyolester of PAG
• Flow Rate: 0.55 Cv

The post HFO-1234yf SERIES 109 MODEL 89 POWER COUPLER (LOW-SIDE) appeared first on PCU.